You know I love chairs, right? If you don’t know that about me, read up. After getting rid of a lot of chairs, I had to keep this one. It was a steal at a garage sale and since I live in a Craftsman style bungalow, I needed this Craftsman style rocker to go with it, right? Of course.
The style, the simplicity, the design, the price – they were all right up my alley.
It was in good shape but rickety. After sitting in the garage for a spell (to make sure no critters were living inside – remember the rats?), every joint needed re-gluing.
There were lots of old staples and tacks that needed pulling out.
The cushion had springs, and aside from covers being torn, looked like it was still in good condition.
After getting nails, tacks, and staples out, the chair was ready for a little bit of sanding – but not too much. I was trying not to remove too much of the old finish.
I used a mixture of half tung oil and half turpentine, with very fine steel, wool on the wood. I brushed this on and let it sit for 20 minutes or so. This mixture works well to take the old finish off, and put a new one on, in one step. The wood was super dry, so it soaked in really quickly.
The steel wool gets into the wood grain and gets the specks of paint and other debris out.
I did do extra coats on the arms of the chair. Those needed to be smooth.
Next, the Craftsman style rocker went up to our bedroom and sat like this for
hours, days, weeks, months, a year could have been more than a year until we finally got around to finishing the cushion part. The chair was really good at holding up clothing for a while.
Now, onto to the cushion….First up, I lined the floor with an old shower curtain. Yes, I hold onto those for projects. It protects everything and makes clean up super easy.
Very few tools were needed because the covers just came right off. Pulling out tacks and old staples took the longest. Vice grips and a small pincer tool work best for those.
It wasn’t pretty inside but the foam rubber cushion cover (over the coil frame) was in good enough shape to reuse.
Foam rubber is expensive so if it can be reused, I reuse it. When it’s getting wrapped in batting and quilt lining, no one will be able to tell if it’s the original.
That’s what I got rid of, and luckily – no signs of bugs or rats. You know I don’t like those.
The front of the chair needed some extra cushioning to cover the springs so I added some scrap foam rubber that I had from another project. Next, I covered the whole thing with more batting.
Then I pushed more foam rubber into the gap. I tried the cover fabric over the seat and it left a gap so I jammed more in there. There is nothing scientific or measured – just do what looks nice.
After I staple gunned the cover fabric onto the frame, I added a piece of scrap fabric to the bottom to cover the coils. This wasn’t necessary because no one will see it but this is what professionals do. Also, it’s gingham and everything needs a little bit of gingham!! I sewed the ends by hand but made sure that none of this stitching would show once the seat went back into the chair. It’s not pretty but it got the job done.
And, now the seat was ready for its new home. Into the rocker it went. And…
Finally done! I love how it turned out and it fits in our bedroom – along with the free dresser we found. I like bedrooms to have rocking chairs. Rocking is very calming.
When it’s not covered in clothes, this Craftsman style rocker looks pretty good in here.
What’s your favorite type of furniture? Do you like rocking chairs?
Go Gingham related links:
My chair sale was a hit – read about it here
Some may call it a ‘chair obsession’ – like my husband!
How to re-do outdoor chairs – easy and best if they’re free
Fixing a chair leg – it’s a cautionary tale – don’t miss it!